Product Description& Uses

Luxor Ceiling emulsion has been especially prepared for use by the trade for the interior ceilings.  Can be applied directly to cement rendering, brick, stone etc., in addition to plastered and softboard Surfaces.  Ceiling emulsion possesses excellent

obliterating characteristics and is extremely easy to apply

Category: Tags: ,

High opacity co-polymer paint with lead-free


Excellent hiding power. The porous nature of the film allows new surfaces to breathe and dry out easily. No primer required on new or previously painted sound surfaces




By brush, roller or spray equipment

Thinning and Mixing

For first coat work and for application to porous, rough or
Textured surfaces, Ceiling emulsion can be thinned with clean
water but over thinning should be avoided.
For spray application thin to the required viscosity with water.
Stir well before use

Drying Times

Re-coatable in 2 hours

Spreading Capacity

The spreading capacity of Luxor Ceiling emulsion varies considerably depending on the texture and porosity of the surface being coated
The following spreading capacities are approximate:
New/Unpainted Surfaces Sq.m/Litre

Smooth/lime plastered Ceiling 11 – 14

Equipment Cleaner


Colour Range

Available in a White and Light Pastel shades only

Pack Size

4 Litres, 20 Litres


From our appointed distributors all over Uganda.

Specifications New work – walls Ceilings etc

Prepare surface (refer to BPC-SP 1).
Apply 3 coats Luxor Ceiling emulsion
2 coats may offer complete obliteration depending on the
surface in use and the surface being coated but 3 coats are Recommended for maximum protection.

Previously (matt Emulsion) painted Surfaces in sound Condition

Prepare surface.
Apply 2 coats Luxor Ceiling emulsion

NOTE: Prepare surface (refer BPC-SP1)

Loosely bound, Unsound surfaces (including walls Previously painted with distemper,cement paint,limewash, etc)

Apply 1 coat Luxor Penetrating Primer.
Apply 2 coats Surecover Ceiling emulsion.