Product Description & Uses

A high performance epoxy coating recommended for application on suitably primed surfaces where outstanding resistance to chemicals, solvents, water, salinity etc. is required.

Luxor Epoxy Enamel is ideal for use in refineries, fertilizer, petrochemical, paper and pulp plants, food and pharmaceutical units and for internal lining surfaces and petroleum products tanks. Also

suitable for concrete surfaces and structures in chemical environments

 

Category: Tags: ,
Characteristics

A two pack, cold cured product based on epoxy resin suitably pigmented and catalysed

Advantages

Very good adhesion, flexibility, oil and chemical resistance

Application

By brush, roller or spray

Mixing

Three parts base to one part hardener by volume

Thinning and equipment Cleaner

Use Luxor Epoxy thinner where necessary

Drying Times

Surface dry 2-3 hours
Hard dry overnight
Recoatable minimum overnight drying and maximum 5 days.
Full cure 5 to 7 days.

Spreading Capacity

10-12 sq.metre per litre at 25-30 microns DFT

Colour range

White, grey, black. For other colours refer to BPC marketing
Dept.

Specifications
Primer

Metal:- Luxor etch primer followed by Epoxy primer

Finish

Apply two to three coats depending on Severity of the
environment

ShareBPC