LUXOR Interior Matt emulsion has been especially formulated for trade users
for the interior decoration of walls and ceilings. It is recommended for direct
application to plaster, brickwork, stone and cement rendering in addition to
soft board surfaces. Ease of application and excellent covering power in an asset
where a smooth, matt durable and ecomic finish is required.

1. When overcoating walls in sound condition with the same shade, the
application of 1 coat may be sufficient.
2. When overcoating a dark colour with a light shade, the application of an
extra coat may be necessary.
3. Choice of colours – for technical reasons (often dependent upon pigment
origin and type) additional coats will often be required when using shades
(particularly Bright Yellow, Greens, Oranges, Reds, – refer colour card for
details). The use of these colours should be avoided on medium and low cost
projects. Where these low opacity colours are to be used on bare plaster,
or for overcoating dark colours, the application of a first coat of pale shade
offering superior coverage is recommended.
4. For chemical reasons, certain dark colours offer less resistance to fading when
subjected to ultra-violet light, especially in tropical climates.
5. Consult Technical Department for advice.

New/ Unpainetd surfaces sq.m/Litre
Smooth/lime plastered walls 9 – 14
Cement rendered wood float walls 7-9
Concrete block bag-washed surfaces 3-5
Tyrolean/roughcast plaster 2-4
Previously Painted Surfaces sq.m/Litre
Smooth/lime plastered wall 11-13
Cement rendered wood float walls 10-12
Concrete block bag-washed surfaces 6-8
Tyrolean/roughcast plaster 3-4

SKU: Luxor-004 Category: Tags: ,

High opacity a crylic co-polymer emulsion paint with
good resistance against fungus growth.


Economical with excellent hiding power, very good
washability and scrub resistance. Allows new surfaces to
breath and dry out.




By Brush, roller or spray equipment.

Thinning & Mixing

Thin with clean water where necessary for first coat work
or application to porous / textured surfaces. For spray
application thin the required viscosity but avoid over

Drying Times

Surface dry 30 minutes. Recoating 2-3 hours

Spreading Capacity

The spreading capacity of Luxor Interior Matt Emulsion
varies considerably depending on the texture and porosity
of the surface being coated.

Equipment Cleaner


Color Range

Available in a selected range of colours.


From our appointed distributors all over Uganda.

Pack Size

4 Litres, 20 Litres

New, Unpainted Walls, Ceilings, Etc

• Prepare surface (refer to BPC-SP 1).
• Apply 3 coats LUXOR Interior Matt Emulsion.
2 coats may offer complete obliteration depending on the
Colour in use and the surface being coated but 3 coats are
Recommended for maximum protection.

Previously (Matt Emulsion) Painted Surfaces In Sound Condition

• Prepare surface
• Apply 2 coats LUXOR Acryli Matt Emulsion.
1 coat may be sufficient when using the same shade over
Paint work in reasonable condition.

Loosely Bound, Unsound Surfaces (Including Walls Previously Painted With Distemper, Cement Paint, Limewash, Etc)

• Prepare surface (refer BPC-SP1)
• Apply 1 coat LUXOR Undercoat Primer.
• Apply 2 coats LUXOR ACrylic Matt Emulsion.