Product Description & Uses:
A superior quality protective finish producing a deep gloss finish on properly
prepared surface. Suitable for use on wood, metal, Plaster, Wallboards, brick
work and stone work etc, over the appropriate primer and undercoat.
LUXOR Super Gloss is formulated to offer maximum durability in extreme
tropical and coastral weather conditions and contains a Polyurethane additive
to improve resistance against abrasion and general wear and tear. Also
available in fungicidal Quality to combat mould growth, algae etc.


  • When using white or a pale shade of undercoat and finishing coats over
    a dark primer or a dark previously painted surfaces, the application of a
    second coat undercoat may be required.
  • Stop up cracks, nail holes and other surface imprefections with linseed oil
    putty or appropriate filler, after priming or before undercoating.
  • Allow 16 hours drying time and lightly rub down and dust off between coats.
  • When repainting sound gloss painted surface with a similar shade the
    application of one good coat of LUXOR Super Gloss is frequently sufficient

SKU: Luxor-007 Category: Tags: ,

Manufactured from the highest quality pigments and
alky resign medium, containing Polyurethane.


Unique formulation offering excellent opacity and
durability, inhibiting early chalking. Excellent flexibility
to withstand tropical weather conditions. Easy to apply.
Wide colour range.


Full Gloss


By Brush, roller or spray.

Thinning & Mixing

LUXOR Super Gloss is supplied ready for use, for spray
application, thin to the required viscosity with LUXOR
White Spirit. Stir well before use.

Drying Times

Surface dry in approximately 4 hours. Through dry and
recoatable after 16 hours

Spreading Capacity

13-15 square metres per litre when applied over LUXOR
Universal Undercoat on a smooth surface.

Equipment Cleaner

White Spirit.

Color Range

Available in the full BS 4800 colour range plus additional
LUXOR house colours.


From our appointed distributors all over Uganda.

New Work for maximum protection, Interior & Exterior

• Prepare surface (refer appropriate surface
preparation data sheet)
• Apply 1 coat (appropriate) primer, followed by 1 coat
LUXOR Undercoat
• Apply 2 coats LUXOR Super Gloss.
When applying gloss on gloss the 1st coat should be
lightly abraded with fine sandpaper to guarantee good
intercoat adhesion

Minimum Protection New Work For Medium & Low Cost Projects

• Prepare surface (refer appropriate surface
preparation Datasheet).
• Apply 1 coat (appropriate) prime. 1 coat LUXOR
• Apply 1 coat LUXOR Super Gloss.

Previously Painted Surface In Unsound Condition

Remove all old loose, flaking and wrinkled oil paint
using paint scrappers/sandpapers or by blow torch, paint
and varnish remover or mechanical means down to the
original surface where necessary. Patch Prime (bare
metal, wood, Plaster surfaces) with appropriate primer.
Apply 1 coat LUXOR Undercoat Followed by 1 coat
LUXOR Super Gloss