PRODUCT DESCRIPTION & USES:
A high performance fungicidal emulsion paint offering maximum protection
on exterior surfaces. Suitable for New and previously painted plaster, cement,
brick, stone and many other surfaces including softboard & hardboard ceilings
and walls, asbestos sheets etc. Exceptional ease of application and dries to a
smooth, Matt finish.
Luxor Weather Guard is specially formulated to withstand extreme tropical
conditions of rainfall, humidity, heat & prevent fungus & algae growth.

ESTIMATED SPREADING CAPACITIES (BRUSH APPLICATION)
SURFACE TYPE NEW OR UNPAINTED
(SQ.M/LITRE)
PREVIOUSLY PAINTED
(SQ.M/LITRE)
Smooth / Lime Plaster 12-14 13-17
Cement rendered /
Wood float plaster
10-12 12-14
Cement bag washed
surfaces over concrete
blocks
5-7 6-8
Tyrolean / Roughcast 2-4 3-5
(SPREADING RATES ON TEXTURED CEILINGS WILL BE LOWER THAN ON
WALLS AS THINNING RATIOS WILL BE RESTRICTED IN ORDER TO AVOID
SPILLAGE / WASTAGE, COMBINED WITH DIFFICULTY OF APPLICATION)
NOTES:
1. When overcoating walls in sound condition with the same shade, the
application of 1 coat may be sufficient.
2. When overcoating a dark color with a light application of an extra coat
may be necessary.
3. Choice of colors for technical reasons (often dependent upon pigment
origin & type) additional coats will often be required when using certain
shades (particularly Bright Yellow, Greens, Oranges, Red – refer colour card
details). The use of these colours should be avoided on medium and low
cost the application of a first coat of pale shade offering superior coverage is
recommended. Consult Luxor Technical Department for advise.
4. For chemical reasons, certain dark colours offer less resistance to fading
when subjected to ultra-violet light, especially in tropical climates. Consult
technical department for further details.

SKU: Luxor-008 Category: Tags: ,
Characteristics

Manufactured from the finest quality, carefully selected
pigments, finely ground in a co-polymer Acrylic Emulsion
medium.

Advantages

Excellent hiding power, Quick drying, Easy to apply,
durable & scrubable . No primer required on new &
previously painted (sound) surfaces. Wide color range.
Smooth Matt finish. Suitable for interior & exterior use.
Allows new walls, still containing moisture to breathe / dry
out.

Finish

Matt

Application

By brush, roller, conventional or airless spray equipment.

Thinning & Mixing

Supplied ready for use. However, on new bare & porous
surfaces & for spray application LUXOR WEATHER
GUARD should be thinned with clean water. Avoid over
thinning as this affects the opacity. Stir well before use

Drying Times

Re-coatable after 4 hours

Spreading Capacity

The spreading capacity of Luxor Weather Guard varies
considerably depending on the texture & porosity of
surface being coated.

Equipment Cleaner

Water

Color Range

BS 4800 color range & LUXOR house colours

Availibility

from our appointed distributors all over Uganda

New Work

Prepare surface (refer appropriate surface preparation
data sheet)
Apply 3 coats Luxor Weather Guard Emulsion Paint

Previously Painted

Prepare surface

Sound Condition

Apply 2 coats Luxor Weather Guard Emulsion PaintLoosely
Bound &
Lime Washed
Cement
Painted
Distempered
surfaces etc

Loosely Bound & Lime Washed Cement Painted Distempered surfaces etc

Remove all loose and flaking material down to a firm
base, where necessary removing all previous decorations
down to the original building fabric (refer surface
preparation data sheet SP1)
Apply 1 coat Luxor Undercoat Primer
Apply 2 coats Luxor Weather Guard Emulsion Paint

There are no reviews yet.

Be the first to review “Weather Guard”

ShareBPC