PRODUCT DESCRIPTION & USES:
A high performance fungicidal emulsion paint offering maximum protection
on exterior surfaces. Suitable for New and previously painted plaster, cement,
brick, stone and many other surfaces including softboard & hardboard ceilings
and walls, asbestos sheets etc. Exceptional ease of application and dries to a
smooth, Matt finish.
Luxor Weather Guard is specially formulated to withstand extreme tropical
conditions of rainfall, humidity, heat & prevent fungus & algae growth.

ESTIMATED SPREADING CAPACITIES (BRUSH APPLICATION)
SURFACE TYPE NEW OR UNPAINTED
(SQ.M/LITRE)
PREVIOUSLY PAINTED
(SQ.M/LITRE)
Smooth / Lime Plaster 12-14 13-17
Cement rendered /
Wood float plaster
10-12 12-14
Cement bag washed
surfaces over concrete
blocks
5-7 6-8
Tyrolean / Roughcast 2-4 3-5
(SPREADING RATES ON TEXTURED CEILINGS WILL BE LOWER THAN ON
WALLS AS THINNING RATIOS WILL BE RESTRICTED IN ORDER TO AVOID
SPILLAGE / WASTAGE, COMBINED WITH DIFFICULTY OF APPLICATION)
NOTES:
1. When overcoating walls in sound condition with the same shade, the
application of 1 coat may be sufficient.
2. When overcoating a dark color with a light application of an extra coat
may be necessary.
3. Choice of colors for technical reasons (often dependent upon pigment
origin & type) additional coats will often be required when using certain
shades (particularly Bright Yellow, Greens, Oranges, Red – refer colour card
details). The use of these colours should be avoided on medium and low
cost the application of a first coat of pale shade offering superior coverage is
recommended. Consult Luxor Technical Department for advise.
4. For chemical reasons, certain dark colours offer less resistance to fading
when subjected to ultra-violet light, especially in tropical climates. Consult
technical department for further details.