PRODUCT DESCRIPTION & USES:
LUXOR Interior Matt emulsion has been especially formulated for trade users
for the interior decoration of walls and ceilings. It is recommended for direct
application to plaster, brickwork, stone and cement rendering in addition to
soft board surfaces. Ease of application and excellent covering power in an asset
where a smooth, matt durable and ecomic finish is required.
1. When overcoating walls in sound condition with the same shade, the
application of 1 coat may be sufficient.
2. When overcoating a dark colour with a light shade, the application of an
extra coat may be necessary.
3. Choice of colours – for technical reasons (often dependent upon pigment
origin and type) additional coats will often be required when using shades
(particularly Bright Yellow, Greens, Oranges, Reds, – refer colour card for
details). The use of these colours should be avoided on medium and low cost
projects. Where these low opacity colours are to be used on bare plaster,
or for overcoating dark colours, the application of a first coat of pale shade
offering superior coverage is recommended.
4. For chemical reasons, certain dark colours offer less resistance to fading when
subjected to ultra-violet light, especially in tropical climates.
5. Consult Technical Department for advice.
THE FOLLOWING SPREADING CAPACITIES ARE
New/ Unpainetd surfaces sq.m/Litre
Smooth/lime plastered walls 9 – 14
Cement rendered wood float walls 7-9
Concrete block bag-washed surfaces 3-5
Tyrolean/roughcast plaster 2-4
Previously Painted Surfaces sq.m/Litre
Smooth/lime plastered wall 11-13
Cement rendered wood float walls 10-12
Concrete block bag-washed surfaces 6-8
Tyrolean/roughcast plaster 3-4
High opacity a crylic co-polymer emulsion paint with
Economical with excellent hiding power, very good
By Brush, roller or spray equipment.
|Thinning & Mixing||
Thin with clean water where necessary for first coat work
Surface dry 30 minutes. Recoating 2-3 hours
The spreading capacity of Luxor Interior Matt Emulsion
Available in a selected range of colours.
From our appointed distributors all over Uganda.
4 Litres, 20 Litres
|New, Unpainted Walls, Ceilings, Etc||
• Prepare surface (refer to BPC-SP 1).
|Previously (Matt Emulsion) Painted Surfaces In Sound Condition||
• Prepare surface
|Loosely Bound, Unsound Surfaces (Including Walls Previously Painted With Distemper, Cement Paint, Limewash, Etc)||
• Prepare surface (refer BPC-SP1)